Simply pull it up to remove but do it gently. 4. Remove the Seat and Spring. Use the screwdriver to pull out the set and spring. Simply replace the old pair in that same position. This will generally fix the leaking faucet, but you should also replace the stem to completely remedy the condition.

41 1 1 2. 1. Presumably the button on the end of the handle pries off. Examine what's in there and proceed. Or the end of the handle might unscrew. Nov 28, 2016 at 12:10. 1. Often a section of the faucet below the handle itself may unscrew. Try holding the handle steady and gripping the bulbous area below the handle and rotating counterclockwise.

Download Article. 1. Turn off the water that runs to the sink. [1] Open the cabinet under the sink and you'll see the shutoff valves. Since you have 2 handles, you'll likely also have 2 shutoff valves—left for hot and right for cold. Shut them off one at a time, then see if your leak stops.

Using a screwdriver and Allen wrench, remove the bolts and screws holding the outside of the faucet in place. In addition, remove the outside sleeve and brass bonnet. Set all the parts aside somewhere safe, as you will need them to reattach the handle when you're finished with the repair. Locate the hot water shower cartridge, which will be

Turn on the water at the shut-off valves and check for leaks around the base of the Grohe faucet. If necessary, use a wrench to tighten the packing nut slightly until the leak stops. Replace the handle, making sure that it is in the correct position according to Grohe's instructions.

fixing a leaking faucet handle